P10 LED Display Outdoor SMD
Specification:
|
Product |
P10 outdoor SMD LED display |
|
|
Module size |
320*160mm |
|
|
Pixel density |
10000dots/m² |
|
|
LED lamp |
SMD3535 |
|
|
Module resolution |
32*16 |
|
|
Module consumption |
48W/pcs |
|
|
Viewing distance |
10-200m |
|
|
Max power consumption |
900W/m² |
|
|
Standard cabinet size |
960*960mm |
|
|
Drive mode |
1/4scan |
|
|
Brightness |
≥5000cd/m² |
|
|
HUB mode |
HUB75 |
|
|
Drive IC |
FM5020/SM16107 |
|
|
Frame frequency |
≧60Hz/s |
|
|
Refresh rate |
≧360Hz/s |
|
|
MTTF |
>5000 hours |
|
|
Life time |
>100,000 hours |
|
|
Defect rate |
<0.0001 |
|
|
Video signal input |
RF, S-video, RGB, RGBHV, YUV, YC, composition |
|
|
Temperature range |
Storage |
-20 to 65°C |
|
Working |
-20 to 50°C |
|
|
Gray scale/color |
4096 grades for R ,G and B |
|
|
Display |
≥16.7M colors |
|
|
Working voltage |
110/220V AC |
|
|
Viewing angle |
Horizontal |
120º |
|
Vertical |
120º |
|
|
Display content |
videos, pictures and graphics |
|
|
Operating humidity |
10-90% |
|
|
Storage humidity |
10-90% |
|
|
Continue working time |
24 hours |
|
|
Control mode |
synchronization/asynchronization |
|
|
Warranty |
2 years |
|
|
Module weight |
0.4KG/PCS |
|
|
Delivery time |
7-15 days |
|
LED potting by function classification
1. Mechanical protection to improve reliability;
2. Strengthen the heat to reduce the chip junction temperature, improve LED performance;
3. Optical control, improve the efficiency of light, optimize the beam distribution.
LED potting paste after curing classification
1. Gel type;
2. Rubber type;
3. Resin type.
Currently use the most common LED electronic potting mainly for the following three kinds
1, epoxy resin: Mostly hard, there are a small part of the soft. The biggest advantage, good adhesion of hard materials, potting can not open, high hardness, good insulation properties, the general temperature in the 100, heating temperature of about 80 degrees Celsius curing.
2, silicone resin potting: After curing more soft, poor adhesion; advantages, high and low temperature resistance, long-term use at 200 degrees Celsius, heating curing temperature is higher, better insulation than epoxy resin, pressure can withstand more than 10000V, affordable , Good repair.
3, polyurethane potting: Adhesion between epoxy and silicone, temperature in general, generally not more than 100 degrees Celsius, more bubbles, must be vacuum pouring. Advantages, good resistance to low temperature performance.
Hot Tags: p10 led display outdoor smd suppliers China, manufacturers, factory, company, low price, high-quality, newest, best, products, outdoor led display for clean areas
You Might Also Like
Send Inquiry