The method of LED electronic display installation

The method of LED electronic display installation

 

Residents living in big cities should know that whether it is in the square, shopping mall, street, or community, LED electronic display is really everywhere. Let's talk about the installation method of LED electronic display?

 

The LED electronic display uses a low-voltage DC power supply voltage, which is very safe to use. The elderly and children can use it with confidence, and it will not cause potential safety hazards. Manufacturers also use very flexible FPCs as substrates in production. The shape is simple and suitable for all kinds of advertising modeling needs. The service life is 8~100,000 hours, 24 hours a day, and the service life is nearly 10 years. Therefore, the lifespan of LED electronic display is several times longer than that of traditional displays. This is unmatched by ordinary monitors and has been proven by customers using it themselves. Of course, more than 50,000 hours is still good, and the ideal use time can reach 10 years. Especially when you use it, you can install it without a professional and enjoy the fun of DIY decoration. Now LED electronic display manufacturers are also constantly innovating. The design of LED display is developing towards the advantages of ultra-light and ultra-thin, die-cast aluminum box, small size, and light weight. Installation is quick and easy.

 

Here we also need to talk to you about the installation method of LED electronic display. First of all, the cut profile is spliced, that is, the outer frame of the assembled display. The general profiles on the market are nothing more than square and round, but the assembly method is the same. Then I suggest that you assemble the outer frame and put the P10 unit board in the frame (pay attention to the front and back sides of the frame, the side with grooves is the front). Change all your worries. After the back strip is fixed, remove the bezel, install the magnet, and then fix the power supply and control card of the display, and connect the control card and power cord. Connect the control card to the nearest unit board with a power cable, and the control card is marked with positive and negative poles. Of course, it is still recommended to choose some cantilever or suspension methods. This method can be used both indoors and outdoors. Indoor scene LED electronic display is generally used at the entrance of passages and corridors, as well as at the entrances of stations, railway stations and subways. Outdoors, it is used for traffic guidance on roads, railways, and highways. The design of LED electronic display is generally designed with an integrated cabinet or a hoisting structure.

 

After the introduction of the above content, we also have a further understanding of the installation method of LED electronic display. You won't feel unfamiliar when you see him again in the future, and you won't have problems often in the process of using it. Well, that's all for today's content, I believe there will be more exciting knowledge points. As the main product of our factory, thanks to the strong support of new and old customers, we ensure the reliability of product quality at the same time, let the benefits of our customers.